Art.-nr 566009

FLH 80x80x3/6,5/FP AL

Fördelarna/produktbeskrivning

L-wall holders for ventilated rainscreen façades.
Fördelar
  • The L-shaped geometry of the wall holder ensures optimised load transfer.
  • The combination of wall holder and vertical profile ensures optimum compensation of tolerances in the building substrate.
  • Compatible with all common fixings and connectors (e.g. fischer frame fixings and steel anchors).
  • The predesigned hole pattern allows for quick and easy installation.
  • Flexible adjustment of the vertical profile possible due to innovative helping hand clip on the wall holder.
The angular L-shaped wall holders FLH AL of the ATK 100 vertical support system made of aluminum are the basis for the vertical level. They are fixed to the building substrate using fischer fixings (such as frame fixings SXRL). To reduce thermal bridges, the wall holders can be installed with additional thermostops made of hard PVC. To enable all common insulation thicknesses and façade offsets, the wall holders are designed in different projection lengths. In order to compensate the thermal expansion of the profiles, the wall holders are used both as fixed points and as sliding points. In addition to the proportional wind loads, the fixed point absorbs the entire dead load of the façade panels and subframe. The sliding point with its slotted holes also ensures that the vertical profile can slide due to thermal expansion. The sliding point is also used to transfer wind loads.

Monteringsinstruktion

Funktion
Mounting Strip 1 Picture
1 / 5

Tekniska data

Längd 80 mm
Höjd (
H
)
80 mm
System
Antal 1 Bit.
GTIN (EAN-Code) 4048962397925
cd-blue-c6785f99-7cp4w